Xbee S2B With Usb Cp2102 Adaptor Board
Rs. 1,170.00 Rs. 1,334.00
- Product Code: XBEE
- SKU - SE-4348
- Availability: 2-3 Days
- Price in reward points: 12
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
Zigbee Mesh Networking, 2.4 GHz Point-to-point, point-to-multipoint, & peer-to-peer, DSSS (Direct Sequence Spread Spectrum), Channel Capacity 16, 10-bit ADC inputs.
Application Ideas:
-Remotely Monitor and Control Wind Turbines
-Network-Enable Wireless Access Control Points
-Reduce Hotels' Energy Costs
-Wireless Mesh Technology Used in Life Saving Application
-Monitoring Cooking Oil in Restaurants
-Automating Parking Structure Systems
-Remote Building System Management
-Monitoring Residential Wind Turbines
-Monitor Harsh Environments
-Monitoring Farm Silo Levels
-Monitoring Fluid Levels at an Automobile Quick Lube Station
-Measuring Tank Levels in a Brewery
-The XBP24-Z7WIT-004 module is part of the XBee ZB family which provides ZigBee level interoperability with ZigBee devices from other vendors. This hardware is only compatible with other ZB XBee modules; it is not compatible with the XBee 802.15.4.
-How else do the ZB XBee modules differ from 802.15.4? ZB: Is compatible only with ZB family
-Slightly longer communication distance: 400 feet and up to two miles line of sight for the 1.25 mW and 60 mW modules respectively
-Maximum baud rate is higher at up to 1 Mbps
-Slightly lower power consumption than 802.15.4
-Two less A/D I/Os and two more digital I/Os than 802.15.4
-The most common factor in determining whether to use ZB is the potential need to tie-in with other ZigBee-compatible networks. If this is not a requirement, 802.15.4 may be perfectly suitable for your project. Still having trouble deciding whether to use 802.15.4 or ZB?
-Because the XBee modules have 2 mm pin spacing, we recommend one of our adapter boards for each module. Our adapter boards provide several advantages to the XBee modules such breadboard-friendly standard 0.1 -inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board) so you can easily configure and test each XBee module prior to putting it in a point-to-point application.
Features:
-Wire antenna
-Cross-compatibility with other ZB modules
-Low-power sleep modes
-300 ft (90 m) indoor/urban range and 2 miles (3200 m) outdoor line-of-sight range
-Configured with API or AT commands, local or over the air
-10 digital I/O and (4) 10-bit ADC inputs
-Adapter Boards
-XBee Adapter Board
-XBee USB Adapter Board
-Application Ideas
-Remote controlled Boe-Bot robot
-Wireless data acquisition
-Remote signal beacon for adventure seekers
-Remote industrial monitoring
-Lighting control
-Keyless entry
SPECIFICATION:
-1200 bps – 1 Mbps interface data rate
-2.4 GHz frequency band (accepted world-wide)
-Industrial temperature rating (-40C to 85C)
-Transmit power 60 mW (+ 18 dBm)
-Supply voltage 2.7-3.6 VDC; transmit current 205 mA; receive current 47 mA
-Power-down current <3.5 uA
-3.3V CMOS UART interface level
OVERVIEW:
-1200 bps – 1 Mbps interface data rate
-2.4 GHz frequency band (accepted world-wide)
-Industrial temperature rating (-40C to 85C)
-Transmit power 60 mW (+ 18 dBm)
-Supply voltage 2.7-3.6 VDC; transmit current 205 mA; receive current 47 mA
-Power-down current <3.5 uA
-3.3V CMOS UART interface level
PACKAGE INCLUDES:
1 PCS x Xbee S2B With Usb Cp2102 Adaptor Board
15 DAYS