Ethernet W5100 Shield Network Expansion Board Micro Sd Card Slot For Arduino
Rs. 527.00 Rs. 607.00
- Product Code: SHIELD
- SKU -
- Availability: In Stock
- Price in reward points: 7
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
- The Arduino Ethernet Shield lets in an Arduino board to connect to the internet. It is primarily based on the Wiznet W5100 ethernet chip. The Wiznet W5100 offers a network (IP) stack capable of both TCP and UDP.
- The Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot helps up to 4 simultaneous socket connections.
- Use the Ethernet library to jot down sketches which connect with the net using the guard. The ethernet shield connects to an Arduino board the usage of long twine-wrap headers which amplify through the guard.
- This keeps the pin layout intact and allows every other guard to be stacked on top.
- The maximum latest revision of the board exposes the 1.Zero pinout on rev three of the Arduino UNO board.
- This Ethernet Shield connects the UNO R3 board to the internet in mere mins.
- Just plug this module onto your Arduino board, connect it on your community with an RJ45 cable (no longer protected) and comply with some simple instructions to start controlling your international through the net.
- Permits you to connect your Arduino UNO 328 or MEGA 2650 1280 to a community or the internet AND retrieve or store documents on a Micro SD Card!
- The Ethernet Shield has a widespread RJ-forty five connection, with an integrated line transformer and Power over Ethernet enabled. There is an onboard micro-SD card slot, which may be used to keep files for serving over the network. It is well suited with the Uno and Mega (the usage of the Ethernet library). The onboard microSD card reader is available via the SD Library.
- When operating with this library, SS is on Pin four. The original revision of the guard contained a sizeable SD card slot; this isn't always supported.
- The guard additionally includes a reset controller, to make sure that the W5100 Ethernet module is properly reset on power-up. Previous revisions of the protect had been no longer well matched with the Mega and need to be manually reset after energy-up.
Features :
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Compatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560).
- Can be accessed using the Mini SD TF library.
- The current shield has a Power over Ethernet (PoE) module designed to extract power from a conventional twisted pair Category 5 Ethernet cable.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
- 1500V isolation (input to output)
| Specifications | |
| IC Chip | Wiznet W5100 |
| Connection speed | 10/100Mb |
| Operating Voltage(VDC) | 5 |
| Length (mm) | 75 |
| Width (mm) | 54 |
| Height (mm) | 25 |
| Weight (gm) | 78 |
| Shipment Dimensions | 12 × 8 × 4 cm" |
OVERVIEW:
-Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
-Stackable Design, can directly be supported by for Arduino official Ethernet Library.
-Supports up to four simultaneous socket connections
-Can be used to store files for serving over the network.
-Can be accessed using the Mini SD TF library.
-IEEE802.3af compliant
-Low output ripple and noise (100mVpp)
-Overload and short-circuit protection
PACKAGE INCLUDES:
1 PCS x W5100 Ethernet Shield With Micro Sd Card Slot For Arduino Uno R3 Mega
15 DAYS