Arduino Uno Wifi Rev2
Rs. 1.00 Rs. 2.00
- Brand: https://store.arduino.cc/usa/arduino-uno-wifi-rev2
- Product Code: ARDUINO-ORG
- SKU - SE-803
- Availability: 2-3 Days
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family.
-Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the Arduino UNO WiFi Rev.2 is your one- stop-solution for many of the basic IoT application scenarios.
-Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator.
-The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi / Bluetooth and some other enhancements.
-It incorporates the brand new ATmega4809 8-bit microcontroller from Microchip and has an onboard IMU (Inertial Measurement Unit) LSM6DS3TR.
-The Wi-Fi Module is a self-contained SoC with integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point.
-It is the u-blox NINA-W102 and (here) you find the datasheet.
-The Arduino UNO WiFi Rev.2 has 14 digital input/output pins—5 can be used as PWM outputs—6 analog inputs, a USB connection, a power jack, an ICSP header, and a reset button.
-It contains everything needed to support the microcontroller.
-Simply connect it to a computer with a USB cable or power it with an AC adapter or battery to get started.
-Compatibility
-This board has the Microchip ATmega4809 microcontroller, but thanks to the compatibility layer included in the core, you can run all the sketches made for the UNO's ATmega328P microcontroller on the ATmega4809.
-You can find more information about the usage of this mode in the Getting Started page of the Arduino UNO WiFi Rev.2.
-Bluetooth® and BLE
-The communications chipset on the Arduino UNO WiFi Rev.2 can be both a BLE and Bluetooth® client and host device.
-Something pretty unique in the world of microcontroller platforms.
-If you want to see how easy it is to create a Bluetooth® central or a peripheral device, explore the examples at our ArduinoBLE library.
-We Make it Open for you to Hack Along
-The Arduino UNO WiFi Rev.2 is a dual processor device that invites for experimentation.
-Hacking the WiFiNINA module allows you to, for example, make use of both WiFi and BLE / Bluetooth® at once on the board.
-Yet another possibility is having a super-lightweight version of linux running on the module, while the main microcontroller controls low level devices like motors, or screens.
-These experimental techniques, require advanced hacking on your side.
-They are possible via modifying the module's firmware that you can find at our github repositories.
BEWARE: this kind of hacking breaks the certification of your WiFiNINA module, do it at your own risk. .
-Related Boards
-If you are looking at upgrading from previous Arduino designs, or if you are just interested in boards with similar functionality, at Arduino you can find:
-MKR WiFi 1010: the small form factor version of the Arduino UNO WiFi Rev.2, with a battery connector and an additional I2C port. Read more here.
-Nano 33 IoT: if you need an even smaller form factor, this board sacrifices the battery connector, but the basic functionality is essentially the same. Visit its product page here.
-MKR WiFi 1000: can only run WiFi applications, as it includes a different chipset than the MKR WiFi 1010. Read more about it here.
| SPECIFICATION: | |
| Microcontroller | ATmega4809 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7 - 12V |
| Digital I/O Pins | 14 — 5 Provide PWM Output |
| PWM Digital I/O Pins | 5 |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 48 KB (ATmega4809) |
| SRAM | 6,144 Bytes (ATmega4809) |
| EEPROM | 256 Bytes (ATmega4809) |
| Clock Speed | 16 MHz |
| Radio module | u-blox NINA-W102 |
| Secure Element | ATECC608A |
| Inertial Measurement Unit | LSM6DS3TR |
| LED_BUILTIN | 25 |
| OVERVIEW: | |
| Microcontroller | ATmega4809 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7 - 12V |
| Digital I/O Pins | 14 — 5 Provide PWM Output |
| PWM Digital I/O Pins | 5 |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 48 KB (ATmega4809) |
| SRAM | 6,144 Bytes (ATmega4809) |
| EEPROM | 256 Bytes (ATmega4809) |
| Clock Speed | 16 MHz |
| Radio module | u-blox NINA-W102 |
| Secure Element | ATECC608A |
| Inertial Measurement Unit | LSM6DS3TR |
| LED_BUILTIN | 25 |
PACKAGE INCLUDES:
1 PCS x Arduino Uno Wifi Rev2 Original
https://store.arduino.cc/usa/arduino-uno-wifi-rev2
15 days