Arduino Uno R3 Ch340G Usb Ic Smd Atmega328P Ic Compatible With Arduino Uno R3 With A To B Usb Cable 30Cm Acrylic Case Shell Enclosure Gloss Box
Rs. 296.00 Rs. 338.00
- Brand: https://www.arduino.cc/en/Main/ArduinoBoardUnoSMD
- Product Code: ARDUINO
- SKU - SE-6
- Availability: 2-3 Days
- Price in reward points: 3
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
DESCRIPTION:
-The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino.
-It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.
-We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly.
-The only time the CH340 chip is used is during programming and when using the serial output of the USB port.
-During normal operation, this board is identical to the more expensive version without CH340 chip.
Main changes from the older version:
-Two rows of the holes for the pins (Male and Female). So it can be connected with normal Female Jumpers.
-Additional 3 rows of the holes for wiring.
-Changes to the DIP package of ATMEGA328P to flat package.
-CH340G replace ATmega16U2
How to use:
-Download the IDE Arduino
-Download the USB chip driver
-Plug in UNO development board, the driver will be installed automatically
-Select the UNO from the die
-Select the COM port
-The best choice first, Arduino comes with routine procedures, burn into it.
| SPECIFICATION | |
| Model Type | Arduino Uno R3 |
| Microcontroller Chip | ATmega328 (SMD) – Interface CH340G |
| Operating Voltage | 5 V |
| Input Voltage(Recommended) | 7-12V |
| Input Voltage (limit) | 6-20V |
| Analog I/O Pins | 6 |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| PWM Digital I/O Pins | 6 |
| DC Current for 3.3V Pin | 50 mA |
| DC Current per I/O Pin | 40 mA |
| Clock Speed | 16 MHz |
| SRAM | 2 KB (ATmega328) |
| EEPROM | 1 KB (ATmega328) |
| Flash Memory | 32 KB (ATmega328) of which 0.5 KB used by bootloader |
| Power Supply Option | DC Jack or USB |
| On Board LEDs | On/Off, L (PIN 13), TX, RX |
| Operating Temperature (°C) | -40 to +90 |
| OVERVIEW | |
| Microcontroller ATmega328 (SMD) | Interface CH340G |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limits) | 5-20V |
| Digital I / O Pins | 14 (of which 6 provide PWM output) |
| Analog Input Pins | 6 |
PACKAGE INCLUDES:
1 PCS x Arduino Uno R3 Ch340G Usb Ic Smd Atmega328P Ic Compatible With Arduino Uno R3 With A To B Usb Cable 30Cm Acrylic Case Shell Enclosure Gloss Box
1 PCS x set of male Jumper Header.
1 PCS x USB to micro USB cable
1 PCS x Transparent acrylic case for Uno R3
https://www.arduino.cc/en/Main/ArduinoBoardUnoSMD
15 days