Tec1 12709 40X40Mm Thermoelectric Cooler 9A Peltier Module
Rs. 258.00 Rs. 310.00
- Brand: https://peltiermodules.com/?p=product
- Product Code: SEN-PELTIER
- Availability: 2-3 Days
- Price in reward points: 3
- For Bulk Order
9962060070
BLE MODULE
DESCRIPTION:
Bluetooth Low Energy (BLE) is a wireless personal area network technology. BLE serves good for all lower energy consumption devices. BLE module can share data only with devices that support it. It uses Gaussian Frequency Shift Keying (GFSK) modulation technique. We use BLE version 4.0. We can communicate through serial ports and Bluetooth chip, using Tx, Rx serial lines. Data transfer is performed using any BLE application from mobile to any external terminal such as PC.
NOTE:
The module connects the BLE automatically with the device without any authentication.
FEATURES:
-Working voltage: 1.9 – 3.6V
-Operating temperature: -40 to 85 degree C
-Maximum transmit power: +8DBM
-Antenna: PCB onboard antenna
-Receiver sensitivity: -92DBM
-Supports only version 4.0 and above devices.
-Operates in 2.4GHz frequency
-Reduced power consumption
-Dual mode device compatible with both classic and low energy peripherals
-Frequency hopping to overcome narrowband interferences.
-Compatible to any highly configured BLE application.
| SPECIFICATIONS | |
| Model | TEC1-12709 |
| Operating Voltage(VDC) | 12 |
| Maximum Voltage(V) | 15 |
| Maximum Current(A) | 9 |
| Maximum Power (W) | 130 |
| Wire Length(mm) | 250 |
| Shipment Weight | 0.125 kg |
| Shipment Dimensions | 5 × 5 × 5 cm |
| OVERVIEW | |
| Model number | TEC1-12709 |
| Operating Voltage | 12V |
| Maximum Voltage- Umax (V) | 15V |
| Maximum Current- Imax (A) | 9A |
| Maximum power (W) | 130 |
| Power Cord | 25cm |
| ₹ 350.00 (inc GST) | |
| ₹ 296.61 (+18% GST extra) |
PACKAGE INCLUDES:
1 PCS x Tec1 12709 40X40Mm Thermoelectric Cooler 9A Peltier Module
https://peltiermodules.com/?p=product
//SOURCE CODE FROM BELOW LINK
//https://content.instructables.com/pdfs/E5K/HLEL/II96XKHB/How-to-Set-Up-a-Peltier-Module.pdf
int buttonPin = 3;
int buttonInput = 1;
int buttonState = 0;
int peltier = 6;
void setup() {
pinMode(buttonPin, INPUT);
}
void loop() {
buttonInput = digitalRead(buttonPin);
if (buttonInput == 0) {
if (buttonState == 0) {
buttonState = 1;
} else {
buttonState = 0;
}
delay(500);
}
if (buttonState == 1) {
analogWrite(peltier, 120); // Look first on how much voltage your peltier unit can handle 255 = 5V
} else {
analogWrite(peltier, 0);
}
delay(500);
}
15 days