Features:
-component profiles
-When the voltage is applied to the piezoelectric ceramic, it will produce mechanical deformation with the change of the voltage and frequency. On the..
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors (red/blue/green) strength in order to achieve a full-col..
-This switch at rest is open (off) state when it subjected to an external force touch with an appropriate shaking force, or its movement speed reaches appropriate centrifugal force..
Features:-The contacts are enclosed, so oxidation of the contact points is impossible.-In hazardous locations, interrupting the circuit does not emit a spark that could ignite flam..
-This module consists of a mercury switch, a 680Ω resistor and a LED that will light up when tilt is detected. -The mercury ball will open/close the circuit when the module is rota..
-Magic Light Cup Module is a board which has a led and a mercury tilt switch. -Using PWM to drive the LEDs on the module you can achieve the effect of light being “magically” trans..
-As the name suggests the Knock Sensor Module produces the Digital output on the detection of Knock i.e. vibration stroke. -Further, the change in voltage level can be manipulated ..
-For microcontrollers without an analog-to-virtual converter or while you want a better-precision ADC, the ADS1015 gives 12-bit precision at 3300 samples/second over I2C. -The chip..
-ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier is mostly used for microcontrollers project which needs an analog-to-digital converter or when you want a higher-pr..
-The ADS1118 is a precision, low power, 16-bit analog-to-digital converter (ADC) that provides all features necessary to measure the most common sensor signals in an ultra-small, l..
AD7705 Dual 16-bit ADC Data Acquisition TM7705 ModuleFeatures of AD7705 Dual 16-bit ADC Data Acquisition TM7705 Module:-3.3V or 5.0V DC power supply-MCU interfaces : SPI-The main A..
-The CD74HC4067 High-Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer. -T..
-The ADS1232 and ADS1234 are precision 24-bit analog-to-digital converters (ADCs).-With an onboard, low-noise programmable gain amplifier (PGA), precision delta-sigma ADC and inter..
8 corridors (24bit) A/dc hardware te:-Stm32f103c8t6 io, users can develop the functionality they need at a second time.-You can download the program through serial port, the specif..
-This version of the MCP4725 Breakout fixes some troubles with the board including the IC footprint, the I2C pinout, changes the general board dimensions to higher fit your tasks, ..
If music be the food of love, play on. But make sure you use this super little DAC Module Mto get the best out of your Raspberry Pi audio!The DAC Module provides a super affordable..