16 Channel 12 Bit Pwm Servo Driver I2C Interface Pca9685 For Arduino Raspberry Pi
Rs. 212.00 Rs. 244.00
- Product Code: MOTORDRIVE-SERVO
- SKU -
- Availability: In Stock
- Price in reward points: 2
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-If you want to make a robot which has plenty of shifting parts or in case you want to govern too many LEDs with PWM outputs, then the constrained PWM outputs of your microcontroller might be a huge hassle for you.
-To overcome this trouble, the simplest factor you should do is to get a 16-Channel 12-Bit PWM/Servo Driver.
-You can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM/Servo Driver using only 2 pins.
-You can even chain up 62 breakouts to manipulate as much as 992 PWM outputs.
-It’s an I2C-managed PWM driver with a integrated clock.
-That manner you do now not need to constantly ship it to signal to tie up your microcontroller, it is completely loose strolling!
-It is 5V compliant, which means you can manipulate it from a 3.3V microcontroller and nevertheless competently pressure up to 6V outputs.
-This is good while you need to manipulate white or blue LEDs with 3.4+ ahead voltages.
-6 address choose pins so that you can wire as much as sixty two of these on a single I2C bus, a total of 992 outputs.
Features :
-Adjustable frequency PWM up to about 1.6 KHz
-12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
-Configurable push-pull or an open-drain output
-The output enable pin to quickly disable all the outputs
-Terminal block for power input
-Reverse polarity protection on the terminal block input
-Green power-good LED
-3 pin connectors in groups of 4 so you can plug in 16 servos at once
-Chainable design
-A spot to place a big capacitor on the V+ line
-220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.
-This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.
| SPECIFICATIONS: | |
| -Driver Chip | PCA9685 |
| -Length (mm) | 62 |
| -Width (mm) | 25 |
| -Height (mm) | 15 |
| -Weight (gm) | 10 |
| -Shipment Weight | 0.095 kg |
| -Shipment Dimensions | 8 × 4 × 3 cm" |
OVERVIEW:
-Adjustable frequency PWM up to about 1.6 KHz
-12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
-Configurable push-pull or an open-drain output
-The output enable pin to quickly disable all the outputs
-Terminal block for power input
-Reverse polarity protection on the terminal block input
-Green power-good LED
PACKAGE INCLUDES:
1 PCS x Pca9685 16 Channel 12 Bit Pwm Servo Driver I2C Interface For Arduino Raspberry Pi
15 DAYS