-sensor-module-raspberry-800x800.jpg "Mg811 Air Carbon Dioxide (Co2) Sensor Module")
-sensor-module-sensorembedded.com-800x800.jpg "Mg811 Air Carbon Dioxide (Co2) Sensor Module")
-sensor-module-sensor-800x800.jpg "Mg811 Air Carbon Dioxide (Co2) Sensor Module")
-sensor-module-raspberrypi-800x800.jpg "Mg811 Air Carbon Dioxide (Co2) Sensor Module")
-sensor-module-iot-800x800.jpg "Mg811 Air Carbon Dioxide (Co2) Sensor Module")
Mg811 Air Carbon Dioxide (Co2) Sensor Module
Rs. 1,826.00 Rs. 2,082.00
- Product Code: SEN-GAS
- SKU -
- Availability: 2-3 Days
- Price in reward points: 25
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-MG-811 Carbon Dioxide Sensor Module (Carbon dioxide sensor) is a carbon dioxide sensor (CO2) sensor that is a Metal Oxide Sensor sensor, which must heat the tank to the specified level.(With the method of supplying power) will cause heat vapor and separate CO2 from the air.
-This sensor module has an MG-811 onboard as the sensor component.
-A signal output circuit for heating the sensorThe MG-811 is highly sensitive to CO2 and less sensitive to alcohol and CO.
-The output voltage of the CO2 increases.
-Useful for greenhouses and medical projects.
-Sends an analog signal that decreases as the concentration of CO2 increases.
-This module also includes a digital output pin with TTL output.
-The Potentiometer on board is used to set the Digital Output Setpoint.
-After setting the potentiometer threshold, once that threshold is reached, an LED on the sensor will illuminate and the digital pin will give a HIGH voltage signal.
Pinout:
VCC :6V ( You can use a4 AA battery holderfor this ).
AOUT :Analog Output (voltage decreases as CO2 Levels increase).
DOUT :Digital Output that goes HIGH when the threshold is reached (set the threshold by turning the onboard potentiometer).
GND :0V.
Features:
-Wide detecting scope.
-High sensitivity & stability.
-Simple drive circuit.
-Digital output: Active low (When it outputs a low-level signal, the indicator LED will be on)
-Analog output: Two Range Options: 0 to 2V or 0V to 4V. The default is 0V to 2V DC
-Compatible with Arduino & Raspberry Pi (for use on analog output with Raspberry Pi you will need anAnalog to Digital Converter Chip).
| SPECIFICATION: | |
| Model | MG811 |
| Operating Voltage (V) | 6V DC |
| Characteristic Gas | CO2 |
| Detection Zone | 0 10000 ppm |
| OVERVIEW: | |
| Model | MG811 |
| Operating Voltage (V) | 6V DC |
| Characteristic Gas | CO2 |
| Detection Zone | 0 10000 ppm |
PACKAGE INCLUDES:
1 PCS x Mg811 Air Carbon Dioxide (Co2) Sensor Module
15 days