Arduino Uno L293D Motor Driver Shield 1Ams
Rs. 97.00 Rs. 107.00
- Product Code: SHIELD
- SKU -
- Availability: In Stock
- Price in reward points: 1
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
- The L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
- This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
- The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to the PWM outputs of the Arduino.
Firmware:
-Arduino Stepper/Servo software library with microstepping support.
-To install, click on Download in the top right corner, select zip and uncompress the folder.
-Rename the folder to AF-motor (check that the renamed folder contains the .cpp and .h files) and install it into the Arduino sketches/libraries folder. For information on how to use and install libraries, see our tutorial! This version now works with the Mega. Public domain!
-AccelStepper library with AFMotor support. This library allows for advanced stepper control including acceleration and deceleration, and concurrent stepper control!
-To install, click on Download in the top right corner, select zip and uncompress the folder.
-Rename the folder to AF-motor (check that the renamed folder contains the .cpp and .h files) and install it into the Arduino sketches/libraries folder.
Note:
-Power for the motors can be supplied from the Arduino boards DC Jack (normally 9V) or from the 2-pin EXT-PWR terminal block. If you are supplying power from the EXT_PWR terminal block you should remove the PWR jumper or you could damage the shield and the Arduino board.
-We have a variety of modules that can be interfaced with this L293D Motor Driver/Servo Shield. Some of them are listed below click on their name to know more>>
-Arduino Boards
-Servo Motors
-DC Motors
-28BYJ-48 Stepper Motor
Features:
-2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
-4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
-Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
-Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
-Pull-down resistors keep motors disabled during power-up
-Big terminal block connectors to easily hook up wires (18-26AWG) and power
-Arduino reset button brought up top
-2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
-Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
-Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!
| SPECIFICATION | |
| Continuous Output Current | 1.2A |
| Logic control voltage Vss | 4.5~5.5V |
OVERVIEW:
-2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
-4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
-Can run motors on 4.5VDC to 25VDC.
-Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
-Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
PACKAGE INCLUDES:
1 PCS x Arduino Uno L293D Motor Driver Shield
https://youtu.be/zZ1sYtoo5gw
15 days