Esp 12F Esp8266 Wifi Wireless Iot Board Module
Rs. 82.00 Rs. 91.00
- Product Code: WIFI
- SKU -
- Availability: In Stock
- Price in reward points: 1
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
- The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless Iot Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
- It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
- ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
- Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community.
- ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
- They are collectively referred to as “ESP-xx modules.
It improved on the Following:
-Peripheral circuit
-The four laminates plate process
-Enhanced impedance matching
-Stronger WiFi signal output
-Anti-jamming ability
-PCB antenna redesigned after professional laboratory testing
Corresponding Interface:
-SDIO 2.0, SPI, UART
-32-pin QFN package
-Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
-Integrated RISC processor, on-chip memory, and external memory interfaces
-Integrated MAC/baseband processors
-Quality of Service management
-I2S interface for high fidelity audio applications
-On-chip low-dropout linear regulators for all internal supplies
-Proprietary spurious-free clock generation architecture
-Integrated WEP, TKIP, AES, and WAPI engines
Note:
-We also have an adapter plate which is compatible with this module, to buy click below
-ESP8266 Adapter Plate
| SPACIFICATION | |
| Compatibility | ESP-12 |
| Communication interface voltage(V) | 3.3 |
| Working current(mA) | 240 |
| Serial port baud rate | 115200(can be modified) |
| Serial communication format | 8N1 |
| Antenna Type | Built-in PCB antenna |
| Wireless Network Mode | station / softAP / SoftAP + station |
| Wireless criteria | 802.11 b / g / n |
| OVERVIEW | |
| Communication interface voltage | 3.3V |
| Working current | 240mA(MAX) |
| Serial port baud rate | 115200 (default), can be modified to other values by AT command |
| Serial communication format | 8N1 |
| Wireless Network Mode | station / softAP / SoftAP + station |
| Wireless criteria | 802.11 b / g / n |
| WIFI @ 2.4 GHz | support for WPA / WPA2 security mode |
| +19.5dBm | output power |
PACKAGE INCLUDES:
1 PCS x Esp-12F Esp8266 Wifi Transceiver Module
15 days