Arduino Due Arm Cortex M3 Board 512Kb Board Compatible With Arduino
Rs. 2,653.00 Rs. 3,051.00
- Brand: https://store.arduino.cc/usa/due, https://www.microchip.com/wwwp
- Product Code: ARDUINO
- SKU - SE-73
- Availability: In Stock
- Price in reward points: 14
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-The Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU.
-The Due Arduino AT91SAM3X8E ARM Cortex-M3 Board is the first Arduino board based on a 32-bit ARM core microcontroller.
-It has 54 digital input / output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
-The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started.
-The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.
-The SAM3X has 512KB (2 blocks of 256KB) of flash memory for storing code.
-The bootloader is pre-burned in a factory from Atmel and is stored in a dedicated ROM memory.
-The available SRAM is 96KB in two contiguous banks of 64KB and 32KB. All the available memory (Flash, RAM, and ROM) can be accessed directly as a flat addressing space.
-It is possible to erase the Flash memory of the SAM3X with the onboard erase button.
-This will remove the currently loaded sketch from the MCU. To erase, press and hold the Erase button for a few seconds while the board is powered.
Due follows the 1.0 pinout:
-TWI: SDA and SCL pins that are near to the AREF pin.
-The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. -This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.
-An unconnected pin, reserved for future use
Connections / Interfaces
Digital I / O pins :54
| With PWM | 12 |
|
USB
|
Yes |
|
SPI
|
No |
|
I²C
|
No |
|
ICSP
|
Yes |
|
TWI
|
2x |
|
UART
|
4x |
|
CAN
|
Yes |
|
SAC
|
2x |
|
LAN
|
No |
|
Bluetooth
|
No |
Note:
Unlike other Arduino boards, the Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board.
Features:
-A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
-CPU clock at 84Mhz
-96KBytes of SRAM
-512KBytes of flash memory for code
-A DMA controller, that can relieve the CPU from doing memory intensive tasks.
| SPECIFICATION | |
| Analog I/O Pins | Input-12 /Output-2 (DAC) |
| Clock Speed | 84 MHz |
| Color | Blue |
| DC Current per I/O Pin | 130 mA, DC Current for 3.3V Pin 800 mA, DC Current for 5V Pin 800m |
| Digital I/O Pins | 54 (of which 12 provide PWM output) |
| Flash Memory | 512 KB all available for the user applications |
| Input Voltage(Recommended) | 7-12V |
| Microcontroller | AT91SAM3X8E |
| Operating Voltage | 3.3V |
| SRAM | 96 KB (two banks 64KB and 32KB) |
| OVERVIEW | ||||
| Microcontroller | AT91SAM3X8E | |||
| Operating Voltage | 3.3V | |||
| Input Voltage (recommended) | 7-12V | |||
| Input Voltage (limits) | 6-16V | |||
| Digital I/O Pins | 54 (of which 12 provide PWM output) | |||
| Analog Input Pins | 12 | |||
| Analog Outputs Pins | 2 (DAC) | |||
| CPU clock at 84Mhz | ||||
| 96KBytes of SRAM | ||||
| A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. | ||||
| CPU clock at 84Mhz | ||||
| 96KBytes of SRAM | ||||
| A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. | ||||
PACKAGE INCLUDES:
1 PCS x Arduino Due Arm Cortex M3 Board 512Kb Development Board Compatible With Arduino
https://store.arduino.cc/usa/due
https://www.microchip.com/wwwproducts/en/ATsam3x8e
15 days