Drv8825 Stepper Motor Driver With Aluminum Heat Sink
Rs. 106.00 Rs. 122.00
- Product Code: MOTORDRIVE-STEPPER
- SKU - SE-7098
- Availability: In Stock
- Price in reward points: 1
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driving force.
-The module has a pinout and interface which can be almost identical to the ones of the A4988 stepper motor driving force providers, so it can be used as a higher-overall performance drop-in alternative for the ones boards in lots of packages.
-The DRV8825 functions adjustable cutting-edge limiting, overcurrent, and overtemperature safety, and 6 microstep resolutions (all the way down to 1/32-step).
-It operates from 8.2 – 45 V and can deliver as much as about 1.5 A in keeping with section with out a heat sink or compelled air waft (rated for up to two.2 A in keeping with coil with enough extra cooling).
Features :
-Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
-Simple step and direction control interface
-Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
-Adjustable current control lets you set the maximum current output with a potentiometer.
-Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
-Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
-45 V maximum supply voltage
-Built-in regulator (no external logic voltage supply needed)
-Can interface directly with 3.3 V and 5 V systems
-Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
-Short-to-ground and shorted-load protection
-4-layer, 2 oz copper PCB for improved heat dissipation
-Exposed solderable ground pad below the driver IC on the bottom of the PCB
| SPECIFICATION: | |
| Supply Voltage (V) | 8.2 to 42 |
| Current Handling Capacity | 2.2 A (Max.) |
| Continuous Current (A) | 1.5 (per phase) |
| Logic Input | 2.5 to 5 V |
| Length (mm) | 15 |
| Width (mm) | 20 |
| Weight (gm) | 4 |
| Shipment Weight | 0.105 kg |
| OVERVIEW: | |
| Supply Voltage | 8.2 – 42 VDC. |
| Current Capacity | 2.2A max(24V). |
| Continuous current per phase | 1.5 A. |
| Minimum Logic voltage | 2.5V. |
| Maximum Logic Voltage | 5V. |
| Microstep resolutions | full, 1/2, 1/4, 1/8, 1/16, and 1/32. |
PACKAGE INCLUDES:
1 PCS x Drv8825 Stepper Motor Driver With Aluminum Heat Sink
15 days