Wish List 0

Cs5460 Energy Meter Module

Rs. 385.00 Rs. 439.00

  • Product Code: SEN-ENERGY
  • SKU -
  • Availability: In Stock
  • Price in reward points: 3
  • For Bulk Order 9962060070
    Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-CS5460 Single phase Bi-directional Power Energy Metering Module 
-The CS5460A is a converter that contains two ΔΣ analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration.
-It can be precise Measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter.
-CS5460A The current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer.
-CS5460A With the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy.
-CS5460A is convenient On-chip AC / DC system calibration.The "bootstrap" feature allows the CS5460A to work independently, After the system power automatically initialized.In the self-boot mode.
-The CS5460A reads the calibration number from an external EEPROM According to the start instruction.
-The CS5460A operates when using this mode When no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter.

SPECIFICATION:

-Power Data Linearity: Linearity in 1000: 1 dynamic range Is ± 0.1%

-On-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function

-Can be "self-guided" from the serial EEPROM smart, not micro Controller

-AC or DC system calibration

-A mechanical counter / stepper motor driver In line with IEC687 / 1036, JIS industry standards Power consumption <12mW

-Optimized shunt interface V to I phase compensation

-Single-supply ground reference signal

-2.5 Volt on-chip reference voltage (maximum temperature drift 60ppm /)

-Simple three-wire digital serial interface

-Watchdog Timer With a power monitor

-Power supply configuration : VA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V

OVERVIEW:

-Power Data Linearity: Linearity in 1000: 1 dynamic range Is ± 0.1%

-On-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function

-Can be "self-guided" from the serial EEPROM smart, not micro Controller

-AC or DC system calibration

-A mechanical counter / stepper motor driver In line with IEC687 / 1036, JIS industry standards Power consumption <12mW

-Optimized shunt interface V to I phase compensation

-Single-supply ground reference signal

-2.5 Volt on-chip reference voltage (maximum temperature drift 60ppm /)

-Simple three-wire digital serial interface

-Watchdog Timer With a power monitor

-Power supply configuration : VA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V

PACKAGE INCLUDES:

1 PCS x Cs5460 Energy Meter Module


15 days

Write a review

Please login or register to review