Wish List 0

Arduino Uno R3 Atmega328 Dip Atmega16U2 Usb Ic With Usb A To B Cable 30Cm

Rs. 410.00 Rs. 468.00

DESCRIPTION:
-This is Pro Mini 5V/16MHz is a 3.3V Arduino running the 8MHz bootloader.
-Pro Mini ATMEGA328P come without connectors. We suggest the first time Arduino users start with the Uno R3.
-It’s a huge board that will get you up and running quickly.
-The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off-board.
-The Pro Mini is a microcontroller board base on the ATmega328P. 
-It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and  holes for mounting pin headers.
-A six pin header can be connected to an FTDI cable to offer USB power and communication to the board. The Pro Mini Arduino is intended for semi-permanent installation in objects or exhibitions. The pin   layout is compatible with the Mini Arduino.

-There are two versions of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz. To buy 3.3V/8MHz Pro Mini click on the name below
  -Pro Mini ATMEGA328P 3.3V/8MHz with Connector
  -Pro Mini ATMEGA328 5V/16M without Connector

Features :
-ATmega328P running at 16MHz with external resonator (0.5% tolerance)
-0.8mm Thin PCB
-USB connection off board
-Supports auto-reset
-5V regulator
-Max 150mA output
-Overcurrent protected
-Weighs less than 2 grams!
-DC input 5V up to 12V
-Onboard Power and Status LEDs
-Analog Pins: 8
-Digital I/Os: 14
-6 PWM port: D3, D5, D6, D9, D10, D11.
-Use For Atmel Atmega328P-AU microcontroller.
-Support serial download.
-Support 9V battery.


SPECIFICATION
Model Type              UNO Rev R3
Microcontroller Chip      ATmega328
Operating Voltage (VDC)      5
Input Voltage(Recommended)   7-12V
Input Voltage (limit)      6-20V
Analog I/O Pins              6
Digital I/O Pins      14 (of which 6 provide PWM output)
PWM Digital I/O Pins      6
DC Current per I/O Pin (mA)  40
DC Current for 3.3V Pin (mA) 50
Clock Speed              16 MHz
SRAM (KB)              2
EEPROM                      1 KB (ATmega328)
Flash Memory              32 KB
On Board LEDs             
On/Off, L (PIN 13), TX, RX
OVERVIEW
Micro-controller             ATmega328.
Operating Voltage            5V.
Input Voltage (recommended)  7-12V.
Digital I/O Pins             14 (of which 6 provide PWM output).
Analog Input Pins            6

PACKAGE INCLUDES:

1 PCS x Arduino Uno R3 Atmega328 Dip Ic Atmega16U2 Usb Ic With Usb A To B Cable 30Cm

1 PCS x USB Cable


15 days

Write a review

Please login or register to review