Arduino Nano Ch340 Chip Board With Usb Cable A To Mini Compatible With Arduino
Rs. 230.00 Rs. 263.00
- Brand: https://store.arduino.cc/usa/arduino-nano
- Product Code: ARDUINO
- SKU -
- Availability: 2-3 Days
- Price in reward points: 3
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-The CH340 Soldered Nano Board R3 Chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.
-Nano CH340 Soldered Board R3 Chip without USB cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.
-The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.
-The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano R3). It has more or less the same functionality of the Arduino Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
-The Nano can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
-it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.
Note:
CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
Features:
-1 pair of TTL level serial transceiver ports RX / TX
-Using Atmel Atmega328P-AU MCU
-There is a bootloader installed in it
-Support USB download and Power
-Support for external 5V ~ 12V DC power supply
-Support power supply by 9V battery
-Support ISP download
-Automatic reset during program download.
-Power OK blue LED on the bottom.
-Green (TX), red (RX) and orange (L) LED.
-+5V to AREF jumper.
-Auto sensing/switching power input.
-Small mini-B USB for programming and serial monitor (cable not included).
-ICSP header for direct program download.
-Standard 0.1” spacing DIP (breadboard friendly).
-Manual reset switch.
| SPECIFICATION | |
| Analog I/O Pin | 8 |
| Architecture | AVR |
| Clock Speed | 16 MHz |
| Color | Blue |
| DC Current per I/O Pin | 40 mA |
| Digital I/O Pins | 22 |
| EEPROM | 1KB |
| Flash Memory | 32 KB of which 2 KB used by bootloader |
| Input Voltage(Recommended) | 7-12 V |
| Microcontroller | ATmega328 |
| Operating Voltage | 5 |
| Power Consumption | 19 mA |
| PWM Output Pins | 6 |
| SRAM | 2KB |
| OVERVIEW: | ||
| -Operating Voltage (logic level) | 5V | |
| -8 analog inputs ports | A0 ~ A7 | |
| -14 Digital input / output ports | TX, RX, D2 ~ D13 | |
With Soldered Connector
-1 pair of TTL level serial transceiver ports RX / TX
-Using Atmel Atmega328P-AU MCU
-There is a bootloader installed in it
-Standard 0.1” spacing DIP (breadboard friendly).
-Manual reset switch.
PACKAGE INCLUDES:
1 PCS x Arduino Nano Ch340 Chip Board With Usb Cable A To Mini Compatible With Arduino Nano
1 PCS x USB Cable (Blue)
https://store.arduino.cc/usa/arduino-nano
15 days