Wish List 0

Arduino Nano Ch340 Chip Board Without Usb Cable Compatible With Arduino

Rs. 171.00 Rs. 201.00

Tags: Arduino Nano Ch340 Chip Board

-The CH340 Soldered Nano Board R3 Chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.

-Nano CH340 Soldered Board R3 Chip without USB cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.

-The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.

-The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano R3). It has more or less the same functionality of the Arduino Uno but in a different package. It lacks   only a DC power jack and works with a Mini-B USB cable instead of a standard one.

-The Nano can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the   highest voltage source.

-it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.


Note:

CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.


Features:

-1 pair of TTL level serial transceiver ports RX / TX

-Using Atmel Atmega328P-AU MCU

-There is a bootloader installed in it

-Support USB download and Power

-Support for external 5V ~ 12V DC power supply

-Support power supply by 9V battery

-Support ISP download

-Automatic reset during program download.

-Power OK blue LED on the bottom.

-Green (TX), red (RX) and orange (L) LED.

-+5V to AREF jumper.

-Auto sensing/switching power input.

-Small mini-B USB for programming and serial monitor (cable not included).

-ICSP header for direct program download.

-Standard 0.1” spacing DIP (breadboard friendly).

-Manual reset switch.

SPECIFICATION  
Analog I/O Pin                8
Architecture                  AVR
Clock Speed                   16 MHz
Color                         Blue
DC Current per I/O Pi         40 mA
Digital I/O Pins              22
EEPROM                        1KB
Flash Memory                  32 KB of which 2 KB used by bootloader
Input Voltage(Recommended)    7-12 V
Microcontroller                ATmega328
Operating Voltage             5
Power Consumption             19 mA
PWM Output Pins               6
SRAM                          2KB

OVERVIEW
-Operating Voltage (logic level)  5V
-8 analog inputs ports            A0 ~ A7
-14 Digital input / output ports  

TX, RX, D2 ~ D13 

 

-With Soldered Connector

-1 pair of TTL level serial transceiver ports RX / TX

-Using Atmel Atmega328P-AU MCU

-There is a bootloader installed in it

-Standard 0.1” spacing DIP (breadboard friendly).

-Manual reset switch.


PACKAGE INCLUDES:

1 PCS x Arduino Nano Ch340 Chip Board Without Usb Cable Compatible With Arduino Nano


15  days

Write a review

Please login or register to review