Arduino Mkr1000 Board
Rs. 4,671.00 Rs. 5,325.00
- Brand: https://store.arduino.cc/usa/arduino-mkr1000-with-headers-mounte
- Product Code: ARDUINO-ORG
- SKU - SE-831
- Availability: 2-3 Days
- Price in reward points: 45
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-Arduino MKR1000 is a powerful board that combines the functionality of an Arduino Zero and a WiFi shield.
-This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking.
-It is based on the Atmel® ATSAMW25 SoC (System on Chip), which is part of the SmartConnect family of Atmel wireless devices specifically designed for Internet of Things (IoT).
-The MKR1000 design includes a LiPo charging circuit that allows the Arduino to run on battery power or external 5V, charging the LiPo battery while running on external power.
-Switching from one source to the other is done automatically.
-A good 32-bit computational power similar to the Arduino Zero board, the usual rich set of I/O interfaces, low-power WiFi with a Cryptochip for secure communication, and the ease of use of the Arduino Integrated Development Environment (IDE) for code development and programming.
-All of these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form factor.
-The USB port can be used to supply power (5V) to the board.
-The Arduino MKR1000 is able to run with or without the LiPo battery connected and has limited power consumption.
Features:
| Microcontroller | SAMD21 Cortex-M0+ 32-bit low-power ARM MCU |
| Board Power Supply (USB/VIN) | 5V |
| Circuit Operating Voltage | 3.3V |
| Digital I/O Pins | 8 |
| PWM Pins | 12 |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
-Full-speed USB device and embedded host
-Pre-mounted headers with pin-out
| SPECIFICATION | |
| Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM MCU |
| Board Power Supply (USB/VIN) | 5V |
| Supported Battery(*) | Li-Po single cell, 3.7V, 700mAh minimum |
| Circuit Operating Voltage | 3.3V |
| Digital I/O Pins | 8 |
| PWM Pins | 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) |
| UART | 1 |
| SPI | 1 |
| I2C | 1 |
| Analog Input Pins | 7 (ADC 8/10/12 bit) |
| Analog Output Pins | 1 (DAC 10 bit) |
| External Interrupts | 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) |
| DC Current per I/O Pin | 7 mA |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| EEPROM | no |
| Clock Speed | 32.768 kHz (RTC), 48 MHz |
| LED_BUILTIN | 6 |
OVERVIEW:
-Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield.
-It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.
PACKAGE INCLUDES:
1 PCS x Arduino Mkr1000 Board Original
https://store.arduino.cc/usa/arduino-mkr1000-with-headers-mounted