Wish List 0

Hall Effect Omnipolar

Rs. 7.00 Rs. 8.00

  • Product Code: SEN-HALL
  • SKU -
  • Availability: In Stock
  • For Bulk Order 9962060070
    Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-AH180-WG-7 Diodes Omnipolar Hall Effect Sensor 3-Pin-SIP-3L Package.
-AH180-WG-7 Diodes Omnipolar Hall Effect Sensor 3-Pin-SIP-3L Package AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery-powered equipment such as cellular phones, PDAs, and portable PCs.
-Based on two Hall- Effect plates and a chopper-stabilized architecture the AH180 provides a reliable solution over the whole operating range.
-To support portable and battery-powered equipment the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24uW with a supply of 3V.
-The single open-drain output switches on with either a north or south pole of sufficient strength.
-When the magnetic flux density (B) is larger than the operate point (Bop), the output is switched on (Output pin is pulled low).
-The output is turned off when B becomes lower than the release point (Brp). The output will remain off when there is no magnetic field.

Applications:
-Sensing & Instrumentation
-Communications & Networking
-Computers & Computer Peripherals
-Consumer Electronics
-Cover switch in clam-shell cellular phones
-Cover switch in Notebook PC/PDA
-Contact-less switch in consumer products
SPECIFICATION:
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Operating Supply Voltage 2.5V
Maximum Operating Supply Voltage 5.5V
Output Current 1mA
Minimum Magnetic Sensor Release Point 10Gs
Maximum Magnetic Sensor Operating Point 60Gs
Dimensions:
Length  4.3mm
Width  1.6mm
Height  3.2mm
Package  SIP -3L


-Typical Magnetic Sensor Hysteresis 15Gs
-Minimum Operating Temperature -40 °C
-Maximum Operating Temperature +85 °C













OVERVIEW:
Magnetic TypeOmnipolar
Mounting TypeSurface Mount
Pin Count3
Minimum Operating Supply Voltage2.5V
Maximum Operating Supply Voltage5.5V
Output Current1mA
Minimum Magnetic Sensor Release Point10Gs
Maximum Magnetic Sensor Operating Point60Gs
Dimensions:
Length 4.3mm
Width 1.6mm
Height 3.2mm
Package SIP -3L


-Typical Magnetic Sensor Hysteresis 15Gs
-Minimum Operating Temperature -40 °C
-Maximum Operating Temperature +85 °C



PACKAGE INCLUDES:

1 PCS x Hall Effect Omnipolar


15 days

Write a review

Please login or register to review