Ad620 Microvolt Milivolt High Precision Voltage Amplifier

Ad620 Microvolt Milivolt High Precision Voltage Amplifier

Rs. 221.00 Rs. 255.00

Product Code: SEN-AMP-INSTRUMENTATION
SKU - SE-2900
Availability: In Stock
Price in reward points: 8
For Bulk Order 9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered

Qty

Reviews (0)

-Microvolt/Milivolt High Precision Voltage Amplifier AD620 Amplifier Transmitter.

-This is a a High Precision Signal Amplifier Board/Voltage Amplifier Module based upon AD620 Instrumentation amplifier IC, Input voltage range: DC 3~12V, Amplification: adjustable 1.5~1000 times, Adjustable zero to improve accuracy.

-Can be used for AC, DC signal amplification.

-Wide input range - This product adopts AD620 to amplify and can amplify microvolts and millivolts.

-Compared withLM358 on the market , it has high amplification precision and good linearity.

-The maximum voltage output range is ±10V .

-Magnification - The potentiometer is used to amplify the input signal.

-The magnification is up to 1000 times and can be adjusted only by a potentiometer.

-Adjustable zero point - Adjust the zero point by zeroing potentiometer, improve the accuracy, and there will be no zero drift phenomenon to meet customer needs.

-The negative pressure output - This module uses 7660A negative voltage chip output negative pressure ( -Vin ), which can be supplied to customers to drive other dual power loads.

Features:

-The AD620 amplification, can amplify microvolt, millivolt, offers higher amplification precision than LM358, the max voltage output range is ± 10V.

-It uses potentiometer to amplify the input signal, max amplification can be 1000 times, can be adjusted by the potentiometer.

-It can not only improve the accuracy, but also can avoid the zero drift phenomenon by using the zero potentiometer to adjust the zero.

-The module adopts 7660A negative voltage chip to output negative voltage(-Vin), can be used to drive other dual power load.

SPECIFICATION:

-The positive selection based on the input supply voltage power supply input voltage of the anode

-13-24 v power supply voltage of 24 v port, at this time + E output 12 v voltage for power supply.

-When the power supply voltage is 5-13 v + E.

-Magnification: 1-1000 multiples is smaller, the greater the bandwidth

-Signal input voltage: 100 uv - 300 mv-

-Output voltage: positive pressure + 6.5 V or so, negative pressure - 4 V or so.

-Magnification adjust way: by board

-Adjust zero, + S and -s short connect, adjust the zero potentiometer output of 0v to improve precision of the module.

GND power supply cathode:

-+ S signal input terminal

-s signal input negative side (can connect GND)

-The OUT signal output

-E output a - 5 v voltage (for sensor power supply)

Note: The input signal, the output signal, power input, must be total to three signals.

OVERVIEW:
Input voltage	DC 3~12V
Amplification	adjustable 1.5~1000 times
Signal input voltage	100µV~300mV
Signal output	± (Vin-2V)
Offset voltage	50µV
Input bias current	1.0nA (Max)
Common mode rejection ratio	100dB
Offset voltage drift	0.6µV/? (Max)

PACKAGE INCLUDES:

1 PCS x Ad620 Microvolt Milivolt High Precision Voltage Amplifier

15 days

Mobile Menu

CATLOG SENSOREMBBEDED

CATLOG-INDIAMART-9962977000

CATLOG-COLLEGETIEUP-9159637383

CATLOG-RICHSTREET-8760044000

CATLOG-RICHI-SHOP-8124771247

Video1

Video2

Video3

Ad620 Microvolt Milivolt High Precision Voltage Amplifier

Write a review