GY-LSM6DS3 Gyro temperature SPI IIC I2C Interface Module

The LSM6DS3 is an accelerometer and a huge 8kb FIFO buffer and an embedded processing interrupt function for gyro sensors specifically for the mobile phone market. Because of the capability and low cost we just created this little breakthrough board lsm6ds3! Each lsm6ds3 breakthrough design becomes super flexible and configurable specifically for many applications.

With the lsm6ds3 breakout, you will be able to detect impact, tilt, movement, tap, step and even read temperature. The LSM6DS3 can read up to 6.7ks/s gyro accelerometer data and data at 1.7ks/s more accurate motion detection. As mentioned above, the breakout also has buffering capability of up to 8KB between data reads, a host of other sensors, thanks to the drive interrupt pin lsm6ds3 built-in FIFO.

Each pin is broken out on the side of the LSM6DS3, board, power and I2C functions, while the other side of the motion pins control the SPI function and interrupt outputs. Keep in mind that the LSM6DS3 is a 3.3V device so providing voltages greater than ~3.6v will not permanently damage the IC. Any 5V operating platform requires a logic level shifter.