Farra Capacitor Protection Board 2.7/16V Lithium Titanate Battery Protection Board

This is Farra Capacitor Protection Board Balance Board 2.7/16V Lithium Titanate Battery Protection Board with Indicator Light. The Farra Capacitor Protection Board Balance Board is designed specifically for lithium titanate batteries to protect them from overcharging, over-discharging, and balancing the cell voltages. The 2.7/16V rating indicates its operating voltage range, typically used for lithium titanate batteries, which have a lower nominal voltage compared to other lithium-ion chemistries.

The indicator lights on the board usually show the status of the battery, such as charging, fully charged, or any faults in the system. This helps users monitor the battery’s condition and ensure it operates within safe parameters.

These protection boards are essential for ensuring the longevity and safety of lithium batteries, especially given their sensitivity to voltage fluctuations. Always follow the manufacturer’s guidelines and specifications when using these protection boards to ensure proper functionality and safety.

1. This protection board can protect Farad capacitors and lithium titanate batteries and is suitable for Farad capacitors and lithium titanate batteries with a voltage of 2.7V

2. The protection voltage can be fine-tuned within the range of 2.5V-3V by replacing the voltage divider resistor (higher equalizing voltage needs to replace the high-resistance power resistor)

3. The working principle of the circuit is that when the voltage of a single battery/capacitor is higher than the equilibrium voltage, the battery/capacitor is discharged by turning on the transistor inside the circuit, and the excess power is dissipated into heat through the power resistor.

4. The single-piece protection board is suitable for any 1-6S battery/capacitor. When the number of strings is less than 6S, connect it from the negative pole according to the wiring diagram, and leave the extra lines empty.