DWIN HMI 5 Inch IPS LCD Resistive Touch Display
Rs. 1,531.00 Rs. 1,554.00
- Product Code: DISPLAY
- Availability: In Stock
- Price in reward points: 5
- For Bulk Order
9962060070
This DWIN 5 inch SMART Screen is quite useful and is full features load SMART screen. It is called SMART screen because it comes with UI development Software from the manufacturer which gives users great and useful tools to develop their own UI with great features. One can design UI Suh as a button, slider, Graph, Text Display, etc on their own.
User can Develop their own UI Using the software provided and pre-installed for it called TA / DGUS II ( DGUS II pre-installed) . Also, it is supported with RGB colour and 16.7M colours. It is also equipped with 250nitnit brightness which makes it visible in daylight too.
It is compatible with All micro-controller Boards. which can be interface with I2C communications.
Features:
Built-in DGUS II intelligent software
Integrated smart screen
Powerful data management
Operating Voltages:5V typical.(MIN:4.5V,MAX:5.5V)
Dimensions:143.5(W) × 80.9(H) × 15.8(T) mm
16.7M colours
Resistive Touch Display
Display:
Size -5″
Resolution: 480 x 854
Brightness -250nit
Active Area – 108.0mm (W) ×64.8mm (H)
Colour – 24-bit colour 8R8G8B
Backlight – LED
Interface:
UART4: Mode is determined by Jumper used after OS configuration )
ON=N81/E81/O81/N82, 3.3V&5V TTL/COMS ;
OFF=N81/E81/O81/N82, RS232.
Model Type : DWIN HMI Display
Model No.: DMG85480C050
Touch Type: Resistive
LED Brightness (MCD) : 250
Interface : I2C, UART
Shipping Weight 0.176 kg
Shipping Dimensions 16 × 10 × 6 cm
User interface
10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash
16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Expand Flash pads
Three expansion slots are available, supporting expansion of NOR Flash and NAND Flash. The maximum expansion for NOR Flash is up to 64Mbytes. When combining NOR Flash and NAND Flash, the maximum expansion is up to 48Mbytes (using two expansion slots) + 512Mbytes.
Buzzer
3V passive buzzer
SD card slot
Supports downloading of all files (user UI files, CFG files, underlying kernel firmware), displays download statistics on the screen, download rate: 4 Mb/s. When downloading files, the SD card needs to be formatted in FAT32 format, with a recommended allocation unit size of 4096
Reserved module interface Supports soldering of WI-FI module and USB download module. WI-FI module model: WI-FI-10; USB module models: HDL702, HDL703
PGT05 interface Used for reprogramming the underlying DGUS firmware
1 x DWIN HMI 5 Inch IPS LCD Resistive Touch Display