DESCRIPTION
The AT89S51/52 Development Board can be used to evaluate and demonstrate the capabilities of AT89S51/52 microcontroller. The MCU socket on board provides support for 40 pin DIP package of AT89S51/52 controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the AT89S51/52 Development Board you will find it to be one of the best development tools available for AT89S51/52 controller. Here below you will find the key features of this product.
DEVELOPMENT BOARD FEATURES
• Compact and ready to use design.
• On board Two Line LCD Display (2x16, 2x24).
• On Board graphical display Interface.
• On Board dot matrix display Interface.
• Eight multiplexed 7-Segment LED Display.
• On Board 8 LED Interface to test I/O.
• On Board NTC (103) Sensor Interface.
• On board LDR sensor interface.
• On Board piezo Buzzer Interface.
• On Board Matrix keyboard (16 keys).
• On Board DIP switch Interface.
• On Board micro SD card Interface.
• On Board L293d Interface.
• On Board 12v, 7.5A Relay Interface.
• On board I2C EEPROM (4K-AT24C04).
• On board I2C RTC (DS 1307) with Crystal and Battery.
• On Board ADC0804 Interface.
• On Board ULN2803 Interface.
• Screw terminal for AC power Supply input.
• External Power Supply range of DC 9V to 20V.
• Adaptor (any standard 9-12V power supply) option.
• On Board 1 Amp Voltage Regulator.
• On Board CAN bus (MCP2551) Interface.
• On Board DB9male and female Connector.
• RS-232 Interface with max232 chip connection.
• On Board XBEE Interface.
• On Board micro USB Connector.
• On Board Bluetooth Interface Support.
• On Board ESP8266 Interface Support.
• Variable potentiometer with analog channel select pin.
• On Board ISP Connector for Atmel microcontrollers.
• On Board 40 pin socket, I/O PORT pins, UART communication, PWM connection.
• On Board 16 MHz Crystal Oscillator.
• On Board Power LED Indicator.
• Can be used as main board for developing applications.
SPECIFICATION:
-Atmel AT 89S52/53 with 11.0592 MHz Crystal Oscillator.
-8 K bytes programmable flash.
-Three Level program memory lock.
-256 Bytes of SRAM.
-Eight Interrupt sources.
-32 Programmable I/O Lines.
-Low Power, Idle and Power Down Modes.
-Interrupt Recovery from Power-down Mode.
-Watchdog Timer.
-Dual Data Pointer.
-Power-off Flag.
-Three 16-Bit Timer / Counter.
-One Serial USART.
-Power Consumption: ~ 25mA.
-Operating voltage: ~ 5V.
OVERVIEW:
-Atmel AT 89S52/53 with 11.0592 MHz Crystal Oscillator.
-8 K bytes programmable flash.
-Three Level program memory lock.
-256 Bytes of SRAM.
-Eight Interrupt sources.
-32 Programmable I/O Lines.
-Low Power, Idle and Power Down Modes.
-Interrupt Recovery from Power-down Mode.
-Watchdog Timer.
-Dual Data Pointer.
-Power-off Flag.
-Three 16-Bit Timer / Counter.
-One Serial USART.
-Power Consumption: ~ 25mA.
-Operating voltage: ~ 5V.
PACKAGE INCLUDES:
1 PCS x Atmel Developemnt Board Advance Trainer Kit
9962060070