Wish List 0

2.42 Inch Oled Spi And Iic Output

Rs. 1,377.00 Rs. 1,694.00

  • Product Code: DISPLAY-OLED
  • SKU -
  • Availability: In Stock
  • Price in reward points: 15
  • For Bulk Order 9962060070
    Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
-Working without backlight, the OLED display module could give out light by itself.
-In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
-OLED display module also has a much faster response time than an LCD.
-The display with small dimension is suitable for MP3, function cellphone, smart health device, etc.
-The seventh pin CS signal is leaded by default; If you do not need it, you can solder R18, then CS signal is directly grounded.
-You can use SPI or IIC, and the default interface is SPI(R17 is soldered, R15, R13 are not soldered); change interface by soldering or desoldering R15, R17, R13(SPI: R17, IIC: R15, R13)


SPECIFICATION:
OLED Driver IC                SSD1309
Resolution                    128 x 64
size                          2.42 inch
Visual Angle                  >160?
Input Voltage                 3.3V ~ 5V DC
Support                       Arduino/ 51series/MSP430 series/ STM32/2/ CSR chip
Consumption                   0.04/h
communicate way /SPI or I2C    can be choosed by R15. R17 R13.the default is SPI , R17 soldered, R13.R15 not soldered if need I2C, R17 remove ,and solder on R15. and R13 solder 0 ohm resistor
OVERVIEW:
OLED Driver IC                SSD1309
Resolution                    128 x 64
size                          2.42 inch
Visual Angle                  >160?
Input Voltage                 3.3V ~ 5V DC
Support                       Arduino/ 51series/MSP430 series/ STM32/2/ CSR chip
Consumption                   0.04/h
communicate way /SPI or I2C    can be choosed by R15. R17 R13.the default is SPI , R17 soldered, R13.R15 not soldered if need I2C, R17 remove ,and solder on R15. and R13 solder 0 ohm resistor

PACKAGE INCLUDES:

1 PCS x 2.42 Inch Oled Spi And Iic Output


15 days

Write a review

Please login or register to review