2 Channel 5V Low Level Solid State Relay Module For Arduino Pic Avr Dsp Arm
Rs. 164.00 Rs. 197.00
- Product Code: RELAY-SSR
- SKU -
- Availability: In Stock
- Price in reward points: 2
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
A -channel relay module (HCMODU0115) providing 2x Omron G3MB-202P stable state relays. This 5V 2 Channel SSR G3MB-202P Solid State Relay Module is capable of switching AC voltages between one hundred and 240V at as much as a 2A cutting-edge. The module may be managed from a 5V virtual supply including an Arduino microcontroller.
A resistive kind fuse is supplied at the module to assist defend excessive contemporary draw.
This 5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse is primarily based at the Omron G3MB SSR relay that may manipulate as much as 2A at 240VAC. This is a 2 Channel SSR relay module, each relay channel has three separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
A Solid State Relay is much like a mechanic relay in which it can be managed via a virtual sign. Solid State Relay generates no noise and has a miles longer lifespan in compared to the conventional mechanic relay.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the equal time, the NO will hook up with the COM permitting conductivity among them. Depending in your wiring this will turn on or off the linked load.
Input part :
|
High level and low level of meaning
High-level trigger refers to the signal trigger end (IN) had a positive voltage and the negative pole of the power supply is usually between, and the triggering end of a trigger connected with the positive pole of a power supply, when the trigger end has a positive voltage or reached the trigger voltage, the relay is attracted.
Low-level trigger refers to the signal triggering voltage between the end and the negative electrode of the power supply is OV, or trigger terminal voltage lower voltage than the positive power supply voltage, low to can trigger, make the relay, is usually the cathode of the power supply and the triggering end of a trigger mode connection, so that the relay is attracted.
Features :
2 channel 2 AMP Solid State Relay board
Control 2 loads of up to 2 amps each at 120V or 240V AC.
Good for lighting, holiday displays etc.
Has been assembled, and the electrical test passed.
Led indicator for each relay.
Use it to control various appliances and other equipment with a large current.
It can be controlled directly by Microcontroller
The 2.54CM pin and blue KF301 terminal are connected to the line of control.
Input control signal voltage:
0-0.5V the state of low-level relay ON
0.5-3.3V Unknown State
3.3-5V high-level relay OFF
| SPECIFICATION | |
| Brand | Omron |
| Part Number | G3MB-202P |
| Voltage(V) | 5 |
| Working Current(mA) | 16 |
| Isolation | Phototriac |
| Max. Load | 2A @240V AC |
OVERVIEW:
-2 channel 2 AMP Solid State Relay board
-Control 2 loads of up to 2 amps each at 120V or 240V AC.
-Good for lighting, holiday displays etc.
Input control signal voltage:
-0-0.5V the state of low-level relay OFF
-0.5-3.3V Unknown State
-3.3-5V high-level relay ON
| Operating Voltage | 5V |
| Operating Current | 16mA |
| Maximum Load | 2A @ 240VAC |
PACKAGE INCLUDES:
1 PCS x 2 Channel 5V Low Level Solid State Relay Module
15 days