2 Channel 12V Relay Module With Optocoppler For Arduino Pic Avr Dsp Arm
Rs. 57.00 Rs. 69.00
- Product Code: RELAY
- SKU - SE-5998
- Availability: In Stock
- Price in reward points: 1
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
- This is a 12V 2-Channel Relay interface board, Be able to control various appliances and other equipment with large current.
- This 2 Road/Channel Relay Module (with light coupling) 12V module meets the safety standard as control areas and load area have the isolation groove.
- Optical coupling isolation module.
- Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy.
- It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
SPECIFICATION |
| Channel | 2 |
| Operating Voltage | 12VDC |
| Current Capacity at AC250V | 10A |
| Current Capacity at DC30V | 10A |
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED status indicators to indicate the relay ON/OFF status
Mounting holes provided
Signal input with a high-level signal, the common and often start conduction
The relay can directly control all kinds of equipment and load
| Length | 50mm |
| Width | 40mm |
| Height | 20mm |
OVERVIEW:
| Channel | 2 |
| Operating Voltage | 12VDC |
| Current Capacity at AC250V | 10A |
| Current Capacity at DC30V | 10A |
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED status indicators to indicate the relay ON/OFF status
Mounting holes provided
Signal input with a high-level signal, the common and often start conduction
The relay can directly control all kinds of equipment and load
| Length | 50mm |
| Width | 40mm |
| Height | 20mm |
PACKAGE INCLUDES:
1 PCS x 2 Channel 12V Relay Module With Optocoppler For Arduino Pic Avr Dsp Arm
15 days