-s2b-sensorembedded.com-800x800.jpg "Xbee Pro 63Mw U.Fl Connection Series 2(Zigbee Mesh) S2B")
-s2b-ai-800x800.jpg "Xbee Pro 63Mw U.Fl Connection Series 2(Zigbee Mesh) S2B")
-s2b-iot-800x800.jpg "Xbee Pro 63Mw U.Fl Connection Series 2(Zigbee Mesh) S2B")
-s2b-sensor-800x800.jpg "Xbee Pro 63Mw U.Fl Connection Series 2(Zigbee Mesh) S2B")
Xbee Pro 63Mw U.Fl Connection Series 2(Zigbee Mesh) S2B
Rs. 933.00 Rs. 1,045.00
- Product Code: XBEE
- SKU -
- Availability: 2-3 Days
- Price in reward points: 9
- For Bulk Order
9962060070
Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
DESCRIPTION
-This is the XBee XBP24-BZ7UIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB mesh firmware.
-These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Series 2B modules use a different hardware configuration from the earlier models and while they will communicate with Series 2 XBee modules, they are not compatible with the outdated Series 2.5 Modules.
-Regular VS Pro
There are a few differences between the regular XBees and the XBee Pros. The Pros are a bit longer, use more power. The greater power means longer range (1 mile instead of 300ft) so if you need the range then use the Pros, otherwise stick with the regular models. You can mix and match these on the same network.
Note: If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. The Series 2 requires considerable setup and configuration.
Note: Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.
Note: If you are using these outside, please check with your local laws regarding radio communication.
| Performance: | |
| -RF Data Rate | 250 Kbps |
| -Indoor/Urban Range | 300 ft. (90 m) |
| -Outdoor/RF Line-of-Sight Range | 2 miles (3200 m)/ Int’l 5000 ft (1500 m) |
| -Transmit Power | 63 mW (+18 dBm) / Int’l 10 mW (+10 dBm) |
| -Receiver Sensitivity (1% PER) | -102 dBm |
| Features: | |
|
-Adjustable Power
|
Yes |
|
-I/O Interface
|
3.3V CMOS UART, SPI, I2C, PWM, DIO, ADC |
|
-Configuration Method
|
API or AT commands, local or over-the-air |
|
-Frequency Band
|
2.4 GHz |
|
-Interference Immunity
|
DSSS (Direct Sequence Spread Spectrum) |
|
-Serial Data Rate
|
1200 bps - 1 Mbps |
|
-ADC Inputs
|
(4) 10-bit ADC inputs |
|
-Digital I/O
|
10 |
|
-Operating Temperature &
Humidity
|
-40° C to +85° C, 0-95% humidity non-condensing |
| Programmability: | |
|
-Memory
|
N/A |
|
-CPU/Clock Speed
|
N/A |
| Networking & Security: | |
|
-Encryption
|
128-bit AES |
|
-Reliable Packet Delivery
|
Retries/Acknowledgments |
|
-IDs and Channels
|
PAN ID 64-bit IEEE MAC, 15 channels |
| Power Requirements: | |
|
-Supply
Voltage
|
2.7-3.6VDC |
|
-Transmit
Current
|
205 mA |
|
-Receive
Current
|
47 mA |
|
Power-Down
Current
|
3.5 uA @ 25º C |
Physical Properties:
-Antenna ：U.FL
PACKAGE INCLUDES:
1 PCS x Xbee Pro 63Mw U.Fl Connection Series 2(Zigbee Mesh) S2B
15 DAYS