Wish List 0

Ky 008 Laser Module 650Nm 5V

Rs. 26.00 Rs. 32.00

  • Product Code: SEN-LASER
  • SKU -
  • Availability: In Stock
  • For Bulk Order 9962060070
    Quick support on WhatsApp (+919962060070) only between morning 11am-4pm, no call will be answered
-The LASER MODULE 650NM 5V head is composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5V DC power supply.
-Laser Diode Module is a breadboard friendly, low cost having the wavelength of 650nm and operating voltage of 5V.
-The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5v dc power supply.
-Pay attention to the laser cell to prevent from being burnt or battery explosion due to a short circuit when removing the battery.

-PINOUT
-GND
-5V
-S (Control: HIGH = Laser on)
-lasermodule_diag

Applications:
-Laser test tools.
-Concentricity positioning.
-Medical equipment positioning.
-Production of signal equipment.
-Use for DIY or robots.
-All kinds of level meters.
-Laser projector.
-Laser toys, etc.
-Warning!!! This is a low power laser device, however as with all laser devices care should be taken when in use. You should never look directly in to its beam or point the laser at another person. Doing so may cause permanent eye damage. This item is not suitable for children.

SPECIFICATIONS:
Operating Voltage(VDC)      3 to 5
Laser Output Type           Red Laser Straight
Driver                      APC circuit
Line Length                 135 mm
Transmit Power              58mW
Operating Current           40mA
Operating Temperature (°C)  -30 to 60
Shipment Weight             0.095 kg
Shipment Dimensions         3 × 3 × 1 cm
OVERVIEW:
Voltage                   3.0 V – 5 V.
Driver                    APC circuit.
Line length               about 135 mm.
Transmit power            58mW.
Operating Current         40mA.
Operating Current         40mA.
Operating temperature     -36◦C ~ 65◦C.
₹ 90.00 (inc GST)
₹ 76.27 (+18% GST extra)

PACKAGE INCLUDES:

1 PCS x Ky 008 Laser Module 650Nm 5V


//SOURCE CODE TAKEN FROM BELOW LINK

//https://arduinomodules.info/ky-008-laser-transmitter-module/

int laserPin = 13;


void setup() {                

pinMode(laserPin, OUTPUT);  // Define the digital output interface pin 13 

}


void loop() {

digitalWrite(laserPin, HIGH); // Open the laser head

delay(1000); // Delay one second

digitalWrite(laserPin, LOW); // Close the laser head

delay(1000); 

}

15 days

Write a review

Please login or register to review