3DPRINTER
10 X 10Mm 1M Cable Drag Chain Wire Carrier
Rs. 1.00 Rs. 2.00
This is 1NO-DESCRIPTION x 1NO-DESCRIPTIONmm 1m Cable Drag Chain Wire Carrier. Cable drag chains are the umbilical cord of modern machines. Drag chains are convenient as well as a p..
Availability:2-3 Days
10 X 15Mm 1M Cable Drag Chain Wire Carrier
Rs. 1.00 Rs. 2.00
This is 1NO-DESCRIPTION x 15mm 1m Cable Drag Chain Wire Carrier. Cable drag chains are the umbilical cord of modern machines. Drag chains are convenient as well as a perfect way to..
Availability:2-3 Days
E3D V6 12V Direct Drive All Metal Hotend Kit – 1.75Mm
Rs. 1.00 Rs. 2.00
The E3D V6 12V Direct Drive All-Metal Hotend Kit – 1.75mm Kit from E3D has been redesigned for your convenience from the ground up! This new hot end contains the same signature hi..
Availability:2-3 Days
E3D Titan Extruder Direct Drive 1.75Mm
Rs. 1.00 Rs. 2.00
E3D Titan Extruder 1.75mm with Direct Drive a Next-Generation Extruder for your 3D Printer brings high-performance, lightweight extrusion to everyone! All the benefits of geared ex..
Availability:2-3 Days
E3D Titan Extruder 1.75Mm With Bowden Adapter
Rs. 1.00 Rs. 2.00
E3D Titan Extruder 1.75mm with Bowden Adapter a Next-Generation Extruder for your 3D Printer brings high-performance, lightweight extrusion to everyone! All the benefits of geared ..
Availability:2-3 Days
-sensor-600x600.jpg "E3D Prusa I3 V6 Upgrade Kit Fully Assembled (Including Motor)")
E3D Prusa I3 V6 Upgrade Kit Fully Assembled (Including Motor)
Rs. 1.00 Rs. 2.00
This kit allows you to upgrade Prusa i3 type machines to full E3D extrusion, with our in-house tested and approved Prusa Upgrade Kit. Featuring the E3D V6 hot-end, and our new Tita..
Availability:2-3 Days
E3D 12V Volcano Upgrade Kit For 1.75Mm With 0.80 Mm Nozzle
Rs. 1.00 Rs. 2.00
With E3D 12V Volcano Upgrade Kit for 1.75mm with NO-DESCRIPTION.8NO-DESCRIPTION mm Nozzle Print big and fast! TheE3D 12V Volcano Upgrade Kit for 1.75mm with NO-DESCRIPTION.8NO-DESC..
Availability:2-3 Days
E3D 12V Direct Drive Lite6 Hotend 1.75Mm
Rs. 1.00 Rs. 2.00
A high temperature all metal hotend such as the E3D v6 is not needed by everyone, the Lite6 fills this gap. The E3D Lite6 is a reliable high-quality 3D printer hotend that is very ..
Availability:2-3 Days
E3D V6 Heat Break 1.75Mm
Rs. 1.00 Rs. 2.00
E3D V6 Heat Break 1.75mm allows High Temp PTFE to pass into the melt zone. Works with Tough Tube and other high-temp PTFE tubings with no jams like with all metal heatbreaks. Works..
Availability:2-3 Days
-iot-600x600.jpg "E3D Titan Extruder Hobb (Stainless Steel)")
E3D Titan Extruder Hobb (Stainless Steel)
Rs. 1.00 Rs. 2.00
This E3D Titan Extruder Hobb stainless steel hobb and the drive gear is a drop-in replacement for the stainless steel hobb supplied with every Titan extruder. These hardened steel..
Availability:2-3 Days
-sensorembedded_com-600x600.jpg "E3D Titan Extruder Hobb (Hardened Steel)")
E3D Titan Extruder Hobb (Hardened Steel)
Rs. 1.00 Rs. 2.00
These hardened steel Hobbs are a drop-in replacement for the standard stainless steel hobb supplied with every Titan extruder. are a drop-in replacement for the standard stainless ..
Availability:2-3 Days
E3D Thermistor Cartridge
Rs. 1.00 Rs. 2.00
E3D Thermistor Cartridge is custom made thermistor encapsulated into an easy to use cartridge package. Using the proven Semitec 1NO-DESCRIPTION4GT thermistors, which are then potte..
Availability:2-3 Days
E3D 12V 30W Standard Heater Cartridge
Rs. 1.00 Rs. 2.00
E3D 12V 3NO-DESCRIPTIONW Standard Heater Cartridge is a powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose-made hi..
Availability:2-3 Days
Mk7 Stainless Steel Extrusion Gear
Rs. 1.00 Rs. 2.00
This MK7 Extruder Drive Gear, although being very small in size, is an important part of an extruder system. It is the part that fits onto the shaft of NEMA 17 Stepper Motors to gr..
Availability:2-3 Days
-ai-600x600.jpg "Complete Kit Of Mk8 Extruder With 0.5Mm Nozzle (Assembled)")
Complete Kit Of Mk8 Extruder With 0.5Mm Nozzle (Assembled)
Rs. 1.00 Rs. 2.00
This single head Complete Kit of Assembled MK8 Extruder has outstanding quality and the best performance for DIY and professional systems. With a 5.5kg (torque) stepper motor and a..
Availability:2-3 Days
-ai-600x600.jpg "Complete Kit Of Mk8 Extruder With 0.4Mm Nozzle (Assembled)")
Complete Kit Of Mk8 Extruder With 0.4Mm Nozzle (Assembled)
Rs. 1.00 Rs. 2.00
This single head Complete Kit of Assembled MK8 Extruder has outstanding quality and the best performance for DIY and professional systems. With a 5.5kg (torque) stepper motor and a..
Availability:2-3 Days