CALL US : +919962060070


Price :
Quantity :  
  • 100 Units in Stock




                The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the deviceing dependently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection fan external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.


  • Operating Voltage 4V to 35V
  • Motor controller L298N, Drives 2 DC motors or 1 stepper motor
  • Max current 2A per channel or 4A max
  • Free running stop and brake function
  • Chip: ST L298N
  • Logic power supply:5v
  • Max power:25w
  • Weight: 35g
  • Size:55mm x 60mm x 30mm
  • Storage temperature:-25 to +135

Motor Driver Features:

  • Compact and Light Weight
  • High Capacity Heat Sink
  • Motor Direction LEDs (indicates direction of motor)
  • Current Feedback for both Ports
  • Four Pull Up Resistor Switch
  • Four Standard Mounting Ho

Motor Driver Specifications:

  • Driver Voltage: 5VDC-46VDC
  • Driver Peak Current: 2A
  • Logic Voltage: 5VDC
  • Logic Power Output: 5VDC at 1A max
  • Logic Current: 0-36 mA
  • Logic Levels: Low: -.3V to 1.5V ; High: 2.3V to VCC
  • Interface: TTL
  • Interface connectors: Terminal blocks, .100 headers
  • Dimensions: 2.36” x 2.13” x 1” (not including connector)
  • Weight: 48 grams
  • Mounting: 4 corner holes, 0.125” diameter

Performance Specifications:

  • Max Drive Power: 25W
  • Commutation Frequency: 40KHz
  • Driver Peak Current: 2A
  • Working Temperature: -25 ? to +130 ?